kickstop_door_p2

Anti-Burglary Advice

 

  

There is an inherent weakness in all traditional inward opening timber doors.

The Kickstop range was devised by a long established firm of locksmiths and security retailers in East London.  Concerned about the growing trend for burglars to kick in a front or back door, they were aware that a door will split open (along the grain) where the door had been weakened as a result of morticing and lock fitting.

 

  •  The strength of a good quality lock is not in question 
  • A door and frame would split open and fail during a forced entry 

 

The main areas of weakness on an inward opening door are:

  1. The door itself - around the mortice deadlock or sashlock.
  2. The door frame - around the mortice lock striking plate.
  3. The door frame and door - around the hinge.
  4. The door frame around the rim lock staple.

 

Kickstop has developed several products to deal with these security issues 

Kickstop door and frame reinforcing and strengthening products have been Made in Britain since June 1988.

There are now around 250 products and finishes in the range and Doorguard Security Products supplies all of them.

Most Kickstop products are suitable for DIY fitting and are 'easy' to fit.  Usually the most difficult process is actually deciding which product is best suited for the door or doors you intend to strengthen and reinforce.

 

 

 

Click Here for Larger Image

 

 

London Bar -  Birmingham Bar

DeadlockGuard - SashlockGuard

FrameGuard - StapleGuard

HingeGuard Plates - HingeGuard

Anti-Thrust Plates - Anti-ThrustGuard

DoorGuard Bar - DoorGuard Grille

 

Doorguard Security Products Price List

 

Tel: 01536 790999

Online B2B shop powered by Security Matters